Information On Hdmi; Audio And Video Signal Flow - Yamaha RX-V463 Bedienungsanleitung

Connections

Information on HDMI™

■ HDMI compatibility with this unit
Audio signal Audio signal
types
2ch Linear PCM 2ch, 32-192 kHz,
16/20/24 bit
Multi-ch Linear 8ch, 32-192 kHz,
PCM 16/20/24 bit
Bitstream Dolby Digital, DTS
This unit's HDMI interface is based on the following
standards:
• HDMI Version 1.2a (High-Definition Multimedia
Interface Specification Version 1.2a) licensed by
HDMI Licensing, LLC.
• HDCP (High-bandwidth Digital Content Protection
System) licensed by Digital Content Protection,
LLC.
Notes
• When CPPM copy-protected DVD audio is played back, video
and audio signals may not be output depending on the type of
the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or
DVI components.
• You can check the potential problem about the HDMI
connection (see page 36).

Audio and video signal flow

■ Audio signal flow
Input
HDMI
AUDIO
Digital output
Analog output
Notes
• 2-channel as well as multi-channel PCM, Dolby Digital and
DTS signals input at the HDMI IN DVD or HDMI IN DTV/
CBL jack can be output at the HDMI OUT jack only when
"SUPPORT AUDIO" is set to "Other" (see page 61).
• Audio signals input at the HDMI IN jacks are not output at the
AUDIO output jacks.
14
En
Compatible
HDMI
formats
components
CD, DVD-Video,
DVD-Audio, etc.
DVD-Audio, etc.
DVD-Video, etc.
Output
■ HDMI jack and cable plug
HDMI
HDMI cable plug
y
• We recommend using an HDMI cable shorter than 5 meters (16
feet) with the HDMI logo printed on it.
• Use a conversion cable (HDMI jack
this unit to other DVI components.
Notes
• Do not disconnect or connect the cable or turn off the power of
the HDMI components connected to the HDMI OUT jack of
this unit while data is being transferred. Doing so may disrupt
playback or cause noise.
• Audio signals input at input jacks other than the HDMI IN DVD
or HDMI IN DTV/CBL jack of this unit cannot be digitally
output at the HDMI OUT jack.
• If you turn off the power of the video monitor connected to the
HDMI OUT jack via a DVI connection, this unit may fail to
establish the connection to the component.
■ Video signal flow
Input
HDMI
COMPONENT
VIDEO
VIDEO
Through
↔
DVI-D jack) to connect
Output