Yamaha RX-V2065 Bedienungsanleitung Seite 48

Setting the option menu for each input source (Option menu)
PLIIx Always reproduces signals in 6.1- or 7.1-
Music channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two surround back speakers are
connected.
EX/ES Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1-
channel.
Off Always reproduces original signals whether or
not the flag for reproducing surround back
channel is present.
Signal Info
Input source: HDMI1-4, AV1-4, V-AUX, USB (USB/NET), NET
RADIO (USB/NET), PC (USB/NET)
Displays information on audio and video signals on the
GUI screen and front panel display. You can change items
to be displayed using jCursor k / n.
• Audio information
•
Format Format of digital audio signals.
Channel The number of input signal channels
(front/surround/LFE).
For example, if input signal channels are
3 front channels, 2 surrounds and LFE,
"3/2/0.1" is displayed.
If a channel that cannot be expressed as
the above, a total number of channels
such as "5.1ch" may be displayed.
Sampling
The sampling frequency per second in
Frequency analog-to-digital conversion.
Bitrate The bit rate of input signal per second.
Notes
• "No Signal" is displayed when no signals are input and "---" is displayed
when signals that this unit cannot recognize are input.
• The bit rate may vary during playback.
• Video information
•
Video In Format and resolution of video input
signal.
Video Out Format and resolution of video output
signal.
Message Error messages about HDMI signals and
HDMI components. See the following for
details of the error messages.
• HDMI error message
(appears only when an error has occurred)
•
HDCP Error HDCP authentication failed.
44
En
Device Over The number of HDMI components
connected is over the limit.
Out of Res. The connected monitor is not compatible
with the video input signal.
FM Mode
Input source: TUNER
Choices: Stereo*, Mono
Sets FM broadcasting receiving mode.
Stereo Receives in stereo mode by priority.
Mono Receives in monaural mode. You can get a
better reception in monaural mode.
Auto Preset
Input source: TUNER
Automatically detects FM radio stations and registers
them as preset stations (page 31).
Clear Preset
Input source: TUNER
Clears preset station (page 32).
PTY Seek
Input source: TUNER
Searches a station that is broadcasting a program under the
desired category from the preset stations while using the
Radio Data System (page 33).
EON
Input source: TUNER
Enables you to receive the EON (enhanced other network)
data service of the Radio Data System (page 34).
Shuffle
Input source: iPod (DOCK), USB (USB/NET), PC (USB/NET)
Choices:
iPod (DOCK): Off*, Songs, Albums
USB (USB/NET), PC (USB/NET): Off*, On
Changes the shuffle playback style.
y
• This setting is shared among the USB/NET sub-input sources (USB and
PC).
Repeat
Input source: iPod (DOCK), USB (USB/NET), PC (USB/NET)
Choices:
Off*, One, All
Changes the repeat playback style.
y
• This setting is shared among the USB/NET sub-input sources (USB and
PC).
Refresh
Input source: PC (USB/NET)
Updates the PC server list displayed in the GUI screen
(page 39).
Connect / Disconnect
Input source: BLUETOOTH (DOCK)
Connects to or disconnects from a Bluetooth component
(page 37).