Selecting A Source On The Gui Screen; Muting Audio Output; Adjusting High/Low Frequency Sounds (Tone Control); Enjoying Pure Hi-Fi Sound - Yamaha RX-V2065 Bedienungsanleitung

Switching remotely controlled external
components linked to scene selections
You can operate an external component with the remote
control of this unit by setting a remote control code for the
external component for each input source. Setting remote
control codes for desired input sources allows you to
switch between external components linked to scene
selections.
1
Register the remote control code of an
external component to the desired input
source (page 61).
Note
• This feature is not available for TUNER input source.
2
While holding down the desired hSCENE
key, press and hold the dInput selection
key to which you registered a remote control
code in step 1.
From now on the external component can be remotely
controllable just by selecting a scene.

Selecting a source on the GUI screen

1
Press iON SCREEN on the remote control.
The GUI screen appears on the video monitor.
Select Scene
BD/DVD TV
2
Use jCursor k / n repeatedly to switch the
page and jCursor l / h repeatedly to
select the desired source.
Category
Select Scene BD/DVD, TV, CD, RADIO
Select Input HDMI1-4, V-AUX, PHONO, MULTI CH,
DOCK, AV1-6, AUDIO1/2, USB, NET
RADIO, PC, TUNER
y
• If an input source you want to select is available in "Select Scene", you
can select the desired input source and sound field program at once.
3
Press jENTER.
CD RADIO
Source

Muting audio output

1
Press vMUTE on the remote control to mute
the audio output.
2
Press vMUTE again to resume audio
output.
Adjusting high/low frequency sounds
(tone control)
You can adjust the balance of the high frequency range
(Treble) and low frequency range (Bass) of sounds output
from the front left and right speakers to obtain desired
tone.
1
Press OTONE CONTROL on the front panel
repeatedly to select "Treble" or "Bass".
Treble
2
Rotate the PPROGRAM selector to adjust
the frequency range.
Control range: –10.0 dB to +10.0 dB
The display returns to the previous screen
automatically in few seconds.
Note
• The tone control settings are not effective when this unit is in the Pure
Direct mode or "MULTI CH" is selected as an input source.

Enjoying pure hi-fi sound

Use Pure Direct mode to enjoy the pure high fidelity
sound of the selected source. When Pure Direct mode is
activated, this unit plays back the selected source with the
least circuitry.
Press SPURE DIRECT (or rPURE DIRECT)
to turn the Pure Direct mode on or off.
SPURE DIRECT lights up when you set Pure Direct
mode on.
The following features are disabled in the Pure Direct
mode.
– sound field program, tone control
– display and operation of the Option menu and Setup
menu
– multi-zone function
y
• The font panel display automatically turns off while this unit in the Pure
Direct mode.
Playback
0.0dB
25
En