Quick Start Guide - Yamaha RX-V2065 Bedienungsanleitung

When you use this product for the first time, perform setup following the steps below. See the related pages for details on
operations and settings.
Step 1: Prepare items for setup
Prepare speakers, DVD player, cables, and other items
necessary for setup.
For example, prepare the following items for setting up a
7.1-channel sound system.
Front right speaker
Video monitor
Front left
speaker
Center
speaker
Components
(such as DVD player)
Surround left speaker
Requirements
Speakers Front speaker
Center speaker
Surround speaker
Surround back
speaker
Active subwoofer
Speaker cable
Subwoofer cable
Reproduction component such as DVD player
Video monitor such as TV
Video cable or HDMI cable
Audio cable
y
• The priority of the requirement of other speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker(s)
• Video and audio cables are unnecessary if you use HDMI cables.

Quick start guide

Subwoofer
Surround right speaker
Surround Back
right speaker
Surround Back
left speaker
qty.
2
1
2
2
1
7
1
1
1
2
2
Step 2: Set up your speakers
Place your speakers in the room and connect them to this
unit.
• Placing speakers
• Connecting speakers
y
• This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer)
that automatically optimizes this unit based on room acoustic
characteristics (audio characteristics of the speakers, speaker positions,
and room acoustics, etc.).
You can enjoy good balanced sound without special knowledge by using
the YPAO technology (☞P. 21).
Step 3: Connect your components
Connect your TV, DVD player, or other components.
• Connecting a TV monitor or projector
• Connecting other components
• Connecting a multi-format player or an
external decoder
• Connecting an external amplifier
• Connecting a USB storage device
• Connecting a Yamaha iPod universal dock or
Bluetooth wireless audio receiver
• Connecting to the network
• Connecting the FM and AM antennas
Step 4: Turn on the power
Connect the power cable and turn on this unit.
• Connecting the power cable
• Turning this unit on and off
Step 5: Select the input source and start
playback
Select the component connected in step 3 as an input
source and start playback.
• Basic procedure
• Selecting sound field programs
y
• This unit supports the SCENE function (page 24) that changes the input
source and sound field program at one time. Four scenes are preset for
different purposes for Blu-ray disc, DVD and CD, and you can select
from a scene from those just by pressing a remote control key.
☞P. 10
☞P. 11
☞P. 14
☞P. 16
☞P. 18
☞P. 18
☞P. 19
☞P. 18
☞P. 19
☞P. 20
☞P. 20
☞P. 20
☞P. 24
☞P. 27
9
En