Operating Logic - Genius JA280C Gebrauchsanleitung - Anweisungen Zur Installation

OPERATING LOGIC

Automatic
Semi-automatic
Automatic with stop
Step-step with stop
CLOSING PHOTOCELL OPERATION
Stops and reverses the motion
Stops and,when released, reverses the motion
Note: all adjustments are performed with the control unit switched off and the gate closed.
GATE
STATUS
CLOSED
OPEN IN
PAUSE
CLOSING
OPENING
opening mode, opens
STOPPING
CLOSED
OPEN IN
PAUSE
CLOSING
OPENING
STOPPING
CLOSED
OPEN IN
PAUSE
CLOSING
OPENING
STOPPING
CLOSED
OPEN
CLOSING
OPENING
STOPPING
FUSE
F1 = 500mA/250V - 5x20
F2 = 1A/250V - 5x20
10. DIP-SWITCH SETTINGS (SW1)
11. OPERATING LOGIC
PULSE A
(total opening) (partial opening)
Opens, pauses and closes
Reset the pause
Re-opens immediately
No effect. If in partial
completely
Closes immediately
Opens, pauses and closes
Re-closes immediately
Re-opens immediately
Re-closes immediately
Closes immediately
Opens, pauses and closes
Reset the pause
Re-opens immediately
Blocks operation
Closes immediately
Opens
Re-closes immediately
Re-opens immediately
Blocks operation
Closes immediately
12. PROTECTIVE FUSES
PROTECTIVE
Accessories
Transformer
PULSES
PULSE B STOP
Blocks Pulse
Blocks
operation
No effect
Blocks Pulse
Blocks
operation
Blocks Pulse
Blocks
operation
Blocks Pulse
Blocks
operation
FUSE
F3 = 315mA/250V - 5x20
7
1 3
2
OFF
OFF
OFF
ON
ON
ON
ON
OFF
PHOTOCELLS
No effect
Blocks Pulse and suspends
the pause
Blocks and reverses or stops
and starts after reset as per
dip-sw 4
No effect
No effect / Blocks Pulse
No effect
Anticipates closing 2
seconds after the release
Blocks and reverses or stops
and starts after reset as per
dip-sw 4
No effect
No effect / Blocks Pulse
No effect
Blocks Pulse and suspends
the pause
Blocks and reverses or stops
and starts after reset as per
dip-sw 4
No effect
No effect / Blocks Pulse
No effect
Blocks Pulse
Blocks and reverses or stops
and starts after reset as per
dip-sw 4
No effect
No effect / Blocks Pulse
PROTECTIVE
Logics
ENGLISH
4
OFF
ON