Remote Control - Yamaha RX-V650 Bedienungsanleitung

Remote control

Problem
The remote control Wrong distance or angle.
does not work nor
function properly.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
The batteries are weak.
The manufacturer code was not correctly
set.
Even if the manufacturer code is correctly
set, there are some models that do not
respond to the remote control.
Cause
The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees off-
axis from the front panel.
Reposition this unit.
Replace all batteries.
Set the manufacturer code correctly using the "LIST
OF MANUFACTURER CODES" at the end of this
manual.
Try to set another code for the same manufacturer
using the "LIST OF MANUFACTURER CODES" at
the end of this manual.
TROUBLESHOOTING
Remedy
Refer to
page
7
—
3
64
64
77