Starting The Setup - Yamaha RX-V650 Bedienungsanleitung

AUTO SETUP

Starting the setup

For best results, make sure the room is as quiet as possible
during the auto setup procedure (YPAO). If there is too
much ambient noise, the results may not be satisfactory.
y
If your subwoofer has adjustable volume and crossover/high cut
frequency controls, set the volume between 9 and 11 o'clock (as
viewed on a conventional clockface) and set the crossover/high
cut frequency to the maximum.
VOLUME
MIN MAX
Subwoofer
1
Switch on this unit and your video monitor.
Make sure the OSD is displayed.
2
Press AMP.
3
Press SET MENU.
4
Press u / d to select AUTO SETUP.
PRESET/CH
SELECT
5
Press SELECT to enter AUTO SETUP.
26
CROSSOVER/
HIGH CUT
MIN MAX
AMP
SET MENU
MENU
A/B/C/D/E
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
[ ]/[ ]:Up/Down
[SELECT]:Enter
PRESET/CH
SELECT
6
Press u / d to select SETUP, then press j / i
to select the desired setting.
1 AUTO:MENU
. SETUP;;;;;;;AUTO
START
Automatic
processing
of all items
[ ]/[ ]:Up/Down
[<]/[>]:Select
AUTO
To perform the auto setup procedure
(YPAO).
RELOAD
To reload the last auto setup (YPAO)
settings to override any manual
changes.
UNDO
To undo the last auto setup (YPAO) and
restore the previous settings.
DEFAULT
To restore the factory preset (default)
setup parameters.
y
You can choose RELOAD or UNDO only if you have
already performed auto setup.
7
Press d to select START, then press SELECT
to start the setup procedure.
• If you selected AUTO in step 6, loud test tones will
be output from each speaker in turn; WAIT appears
during the auto setup procedure.
• If you selected DEFAULT, RELOAD or UNDO in
step 6, no test tones are output.
1 AUTO:MENU
SETUP;;;;;;;AUTO
. START
Automatic
processing
of all items
[ ]/[ ]:Up/Down
[SELECT]:Start
The RESULT:WIRING screen appears after all items
have been measured and set.
RESULT:WIRING
FRONT L;;;;;;;OK
[<]/[>]:Select
[SELECT]:Return
• If an ERROR screen appears, see "If an error
screen appears" on page 27.
• If a WARNING screen appears, see "If a warning
screen appears" on page 28.