Setting The Contrast Of The Lc Display; Restoring Factory Setting - WIKA UPT-2 Serie Betriebsanleitung

10. Detailed settings

10.5 Setting the contrast of the LC display

Setting range: 1 ... 9 (in steps of 1)
1. Open the operating menu with [↵].
Select "Detail setup" and confirm with [↵].
EN
2. Select "Contrast" and confirm with [↵].
3. Change figure using [▲] [▼] and confirm with [↵].
» Contrast is set.

10.6 Restoring factory setting

1. Open the operating menu with [↵].
Select "Detail setup" and confirm with [↵].
2. Select "Reset" and confirm with [↵].
3. Select the settings that are to be reset and confirm with [↵].
Instrument specifications
Instrument settings will be reset to their as-delivered settings.
Drag pointer
The drag pointer values are reset.
4. Confirm reset with [↵].
» The settings are reset.
46 WIKA operating instructions, process transmitter, model UPT-2x