Configuring Via Hart  Interface - WIKA UPT-2 Serie Betriebsanleitung

7. Configuration without display and operating unit
7.2 Configuring via HART
HART®-compatible process transmitters can be operated and configured with opera-
ting software (e.g. PACTware
a hand-held device (e.g. FC475 from Emerson).
The operation of the respective menus is described in the associated online help.
EN
The device drivers are available for download from www.wika.com.
Connecting process transmitter to PC (HART
Any work should only be carried out in a safe area.
1. Connect HART® modem to process transmitter.
2. Connect HART
HART modem
24
interface

), process control software (e.g. AMS or Simatic PDM) or
®
modem to PC or notebook.
®
HART resistor 250 ohm
WIKA operating instructions, process transmitter, model UPT-2x
)
®
Voltage source