La Cimbali Q10 Gebrauch Und Installation Seite 65

WASHING THE SOLUBLES CIRCUIT (WHERE PRESENT)
The following indications are for machines with a soluble
products selection and performed in addition to the washing
procedure described above.
MIXER CLEANING
1 powder funnel
2 powder storage drawer
3 mixer conveyor
 mixer blade
5 nozzle
Here are the steps to perform at the end of the work day.
Please follow these steps:
1
Open the lock ($) to access the solubles
mixer
4
3
5
Remove the nozzle (5) from the mixer
conveyor (3).
7

Remove the mixer blade ().
2
$
%
Open the control panel (%).
5
Turn the ringnut (*) clockwise.
8
2
Remove the powder storage drawer (2).
63
2
3
Detach the powder funnel (1).
6
*
Remove the mixer conveyor (3).
9
Disassemble the delivery spout and
rimove the silicon pipe (S).
1
3

5
1
3
S