Herunterladen Inhalt Inhalt Diese Seite drucken

Product Care; Frequently Asked Questions - Fox FLOAT iCD Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 41
REASSEMBLY
The reassembly procedure is the reverse of disassembly.
1. Apply a thin layer of Shimano DURA-ACE grease (or similar general purpose bicycle grease) to the
detents on the inside of the rotary knob.
Figure 16: Basic Switch Reassembly
16
mtbservice@ridefox.com
EMAIL
2. Install the rotary knob into the switch base by fi rst hooking the guide in the switch base into the
rotary knob, then snapping the two parts together.
3. Install the switch onto the handlebar. Using a 2 mm hex wrench, tighten the switch base fi xing bolt to
7.0 in-lb (0.8 N-m) torque.

PRODUCT CARE

• The product components are designed to be fully waterproofed to withstand wet weather riding
conditions. Do not, however, deliberately place them into water.
• Do not use chemical cleaning agents with the iCD product.
• Never use a high pressure washer for cleaning your bicycle and components.
• Avoid high impact shock with any component of the product; handle with care.
• Avoid repeatedly connecting and reconnecting the small waterproof connectors.
• Contact your place of purchase for product software updates. The most up-to-date fi rmware
download is always available via the USB linkage device (an option purchased separately from your
local authorized FOX dealer), and the Shimano website.

FREQUENTLY ASKED QUESTIONS

What can I do to change my handle-
See "Changing Switch Confi guration".
bar switch confi guration?
Do you have any recommendations for
Make sure the iCD connection wires do not chafe or get snagged on your bike
transporting my iCD-equipped bike?
carrier. Make sure the actuators remain free from contact with any objects.
What are my cleaning options?
See "Product Care". Lightly clean with mild soap and water, and immediately dry
with a clean cloth. Never use a high pressure washer!
Are there any interchangeable parts
Yes, however it is strongly recommended that you fi rst contact FOX about
between FOX FLOAT iCD and other
substituting FOX iCD parts with any similar Shimano product replacement parts.
Shimano products?
17
service.ridefox.com
WEB

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis