Addition Of Distances - Parkside IAN 319468 Bedienungs- Und Sicherheitshinweise

Addition of distances

With this product, you can add the
measured distances together:
1. Measure the first distance as described
in the section "Single distance meas-
urement mode".
2. Press the + / = button
symbol "+"
display
will be shown in the lower row
display
3. Measure the next distance as de-
scribed in the section "Single distance
measurement mode". The new dis-
tance measured will be shown in the
upper row
4. Press the + / = button
new measurement will be added to
the old measured value and the
added result will be shown in the
lower row
5. Repeat steps 3 to 4 to add further
measurements.
6. Press the MODE button
the addition mode. All the
72 GB/IE
will appear in the
28
and the measured distance
2
.
2
of the display
20
of the display
21
. The addition
12
21
.
2
again. The
12
.
2
to leave
4
of