Setting 3 - Christie LX1750 Netzwerkinstallation Und Betrieb

Chapter 4 Controlling the Projector

Setting 3

Item
Video delay control .... Sets the digital processing of the
Closed caption ...... Sets the closed caption function.
Closed caption ....... Sets the closed caption mode. (OFF,
Color ......................... Sets the color of the contents. (Color,
Filter counter(h) ... Displays the filter counter. Reset the
Filter counter
remaining(%) ......... Displays the remaining time every 10% until the specified time comes.
Filter warning......... Sets the time to indicate the filter warning message on the screen. (OFF, 1000H,
Freeze .......................... Sets the image to freeze mode. (ON, OFF)
Test pattern ............. Sets the preset image of the projector. (OFF, Color, Gradation1 - Gradation4, All
Factory default .... Sets all of the projector control items to the factory default setting except the fol-
42
Description
image faster. (OFF, Low, Mid, High)
CC1, CC2, CC3, CC4)
White)
time after replacement of the AMC
(Active Maintenance Cleaner) unit.
Click "Reset", a confirmation display
appears, and then click "OK", the time
will be reset.
* Do not reset the Filter counter
when the filters (the electrostatic pleated filter and electrostatic honeycomb filter)
are not replaced.
2000H, 3000H, 4000H, 5000H)
* When using the optional "Smoke Resistant Filter", the setting time will be OFF,
10H, 15H, 20H.
white, All black, Cross)
lowing items.
User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
time, Network PIN code, Network setting
* This function is not effective for the settings of Network address settings, e-mail
settings, etc.
LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)