Replacing Bulbs - Ducati MONSTER S4Rs Anleitung- Und Instandhaltungsheft

Replacing bulbs

Before replacing a burnt-out bulb, make sure that the new
one complies with voltage and wattage as specified in the
"Electrical System" for that lighting device at page 70.
Headlight (fig. 50)
To facilitate access to the headlight for servicing, remove
the headlight shell as explained in "Removing the headlight
shell" (page 44).
To access the headlight bulbs, unscrew the lower
screw (1) securing the lens/reflector assembly to the
headlight body.
Disconnect the wiring connector (2, fig. 51) from the
headlight bulb. Release the bulb retaining clip (3, fig. 51)
and remove the bulb from its housing.
1
3
E
fig. 50
2
fig. 51
53