Cursors (Vfd) - Mettler Toledo xpress XTC Bedienungsanleitung

STANDARD COUNTING SCALE

CURSORS (VFD)

Key Description
→0←
When the scale is at the gross zero, this cursor will be lit
lb, kg, g Weight unit cursor; Weight unit can be set in Setup Mode
Net When net weight is displayed, this cursor will be lit
ID When item number is recalled, this cursor will be lit
APW When Average Piece Weight (APW) is recalled, this cursor will be lit
B/G When gross weight is recalled, this cursor will be lit
T When push-button tare weight is recalled, this cursor will be lit
PT When keyboard tare is recalled, this cursor will be lit
%Accy When the counting accuracy percentage is recalled, this cursor will be lit
M When the value in the accumulator is not zero, this cursor will be lit
PCS When the count is displayed, this cursor will be lit
> Target Alarm: Indicates the count is above the Over value
< Target Alarm: Indicates the count is below the Under value
< > When both > and < cursors are lit, it indicates that the count is within the target zone
9