Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Pin No.
Signal name Direction
25 Pin 9 Pin
21~24
N/C
25
INIT
13
25
5
1. During the period from when the
power is turned on (including reset-
ting using the interface) to when the
printer is ready to receive data.
2. During the self printing.
3. When the cover is open.
4. When the printer stops printing due to
a paper-end.
5. During macro executing standby
status.
6. When an error has occurred.
7. When the receive buffer becomes
full.
2) X-On/X-Off Communication Mode
Always space, except during following conditions:
• Period between reset and communication enabled
• During self printing
Not used
IN
• DIP Switch 3-8=OFF
Status of this signal is not checked.
• DIP Switch 3-8=ON
This signal used for external reset. Printer is reset whenever signal
is in space state with pulse width of 1mS or more.
1
6
9
– 106 –
Function
Printer status
1
14
D-sub 9 Pin (option)
DIP SW 1-6
OFF
ON
BUSY
BUSY
BUSY
BUSY
-
BUSY
-
BUSY
-
BUSY
-
BUSY
BUSY
BUSY
D-sub 25 Pin
Werbung
Kapitel
Inhaltsverzeichnis
