Stack Menu Settings; Displaying Stack Menu - Christie LW41 Bedienungsanleitung

3. STACK menu settings

Set the Intellectual Stack operation using the STACK menu.
• If you are using Simple Stack without RS-232C connection, skip this
NOTE
chapter.
• If you do not need to change the settings made during the installation
explained prior to this chapter, go to
• Read 3.7 Important information for Intellectual Stack

3.1 Displaying STACK menu

Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen.
(Operating Guide
setting for Intellectual Stack operation starts from this menu.
• Check that the following settings are made on both projectors.
NOTE
Otherwise, STACK menu on the projectors
- STANDBY MODE in SETUP menu: NORMAL
(Operating Guide
- COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
(Operating Guide
- STACK LOCK in SECURITY menu: OFF
LX41/LW41 User Manual - Instant Stack Guide
OPTION menu) The
→
SETUP menu)
→
→ OPTION menu)
3.3 Selecting lamp operation
cannot be operated. ( 7 )
( 7 )
17
mode. ( 19 )
carefully. ( 24 )
020-000509-01 Rev.1 (06-2012)