Background Contrast Lighting - Crivit HG00825 Bedienungs- Und Sicherheitshinweise

Press
3
Hold the SET button 3 pressed down to reset the number of hills to 0.
"HOLD TO RESET" appears in the display
Record
Press the SELECT button 2 in altimeter mode until the display
„RECORD" appears. The current altitude appears in the bottom area
of the display, the graphic altitude display appears in the middle. The
altitude variation and graphic display record the change in altitude
within the last 8 hours.
Press the SET button 3 to recall the altitude record for a specific
location during the last 8 hours. The time of recording is displayed for
every single altitude record.
Hold the SET button pressed down to start a new altitude recording.
"HOLD TO RESET" appears in the display

Background contrast lighting

Press the LIGHT button 4 to switch on the background lighting for
approx. 2 seconds. A permanent lighting of the display is not possible.
48 GB/IE