Trouble Shooting; Fault Correction - Parkside PNTS 1400 G3 Originalbetriebsanleitung

GB IE NI

Trouble shooting

Problem
Device does not
start
Low or lack of
suction
Float does
not switch the
appliance off
18
CY
Possible cause
Mains voltage is not
present
Defective on/off switch (11)
Worn carbon brushes
Defective motor
Hose system or accessories blocked
Suction pipe assembled incorrectly Assemble suction pipe correctly
Container (13) open
Container (13) full
Filter (36) full or clogged
Float in the filter basket (37) does
not move
Float in the filter basket (37) faulty Repair by Customer service center.
Float in the filter basket (37) does
not move
Float in the filter basket (37) faulty Repair by Customer service center.

Fault correction

Check plug socket, cable,
line, plug and fuse, where
appropriate, repair through
electrical specialist
Repair by customer service center.
Remove obstructions and
blockages
Close container
Empty container
Empty, clean or replace filter
Release float
Release float