Orved Evox 30 Bedienungs- Und Wartungsanleitung Seite 98

MAINTENANCE
6) Lift the machine body using both hands and lay it on the front
(on the work table) (Fig. 9).
7) Use a setscrew wrench to undo the oil filling cap at the top of the pump
(Fig. 10).
8) Place a container large enough (0,5 L) close to the drainage hole (Fig. 11).
Use the same wrench to undo the drain cap and leave the oil to flow into
the container for about ten minutes.
98
Fig. 11
Rev. 02 - 09/2013 - Cod. 1501114 - Instruction manual for vacuum chamber packaging machines evox 30
90°
Fig. 9
Fig. 10