Operation; Command Panel - Orved Evox 30 Bedienungs- Und Wartungsanleitung

3) Fill the container with the product to be vacuumed to max ¾ of usable volume, in case of liquid products.
4) Place the container inside or outside the vacuum chamber, according to the size. If outside, suction device is necessary.

7. OpERATION

7.1 COMMAND pANEL

A-D: Keys
1-4: LED
– VAC.
A
to "storage" and "cooking" functions (pay attention to § 5.3.1).
Vacuum cycle in bags selections according to "storage" and "cooking" functions: at the power, the machine is set
on "storage cycle". Pressing VAC key once, the "cooking cycle", is activated. It is identified by LED
VAC key once more, the machine comes back to "storage cycle", identified by LED
Other functions of VAC key:
• Keeping it pressed for 5 seconds, the pump dehumidification cycle is activated. All LED flash.
• Pressed at power moment, allows activating the vacuum sensor calibration.
Rev. 02 - 09/2013 - Cod. 1501114 - Instruction manual for vacuum chamber packaging machines evox 30
D
4
Start key to operate vacuum in bags. It allows to start the vacuum cycle in bags according
C B
3 2
1
LED 1 ON
(FACTORY SETTING):
Vacuum cycle in bags: "storage" function.
LED +
1 2
Vacuum cycle in bags: "cooking" function.
pREpARATION
A
1
1 and 2 on. Pressing
on.
ON:
79