Updating The Firmware - Megasat HD 935 Twin V2 Bedienungsanleitung

8. Additional information

8.3 Updating the Firmware

From time to time the firmware of the set-top box will be changed and improved. To
update the set-top box with a new firmware version, proceed as followss:
Firmware-Update via USB:
On our Homepage www.megasat.tv the
latest firmware is available as download.
Download the ZIP file, unpack the archive
and copy the *.bin file to a previously for-
matted USB stick.
Note: When downloading the firmware, always pay attention to the correct name of the
file that matches your device (e. g. megasat_hd_935_twin_v2_firmware.zip)
1. Plug the USB stick into the receiver and press the USB button on the remote control
to enter the USB menu.
2. Select the file and confirm with OK.
3. You will be asked if you really want to upgrade? Confirm with „Yes".
4. The firmware will be updated now.
5. After successful update the receiver will be restarted.
To accept all settings of the new firmware, you must perform a factory reset
(check „5. Factory settings" on page 13).
Attention: After a factory reset, all settings and the current channel list are lost. You can
save the channel list BEFORE the factory setting and then restore it (check „6. Managing
the program list" on page 16).
38
ENGLISH