Megasat HD 935 Twin V2 Bedienungsanleitung Seite 65

5. HDD slot
4. Fasten the plastic holder for the hard disk with the enclosed screws.
5. Slide the hard drive upside down in the hard drive bay. When the end of the hard
disk firmly until it snaps into place.
Make sure that you push the hard disk straight into the slot!
RIGHT
WRONG
The plastic holder must be flush with the housing of the receiver and must
not be able to survive!
6. Turn on the set-top box and wait until the drive is recognized. Press the USB button
on the remote, then the RED button for the tools. Now select the option medium
format and indicate in which format you want to format the hard drive (FAT or NTFS).
For hard drives up to 1TB in size, we recommend „FAT". Confirm to format the hard
drive with OK.
7. To check the hard drive settings and speed you now press the BLUE button. Press the
BLUE button again to check the speed of your disk. Press EXIT to exit the menu.
Note: Please note that brand-new disks must first be partitioned and formatted so
that the hard disk (HDD or SSD) is detected in the set-top box.
Please only use 2.5-inch SATA hard drives with a maximum power consumption
of 850 mA. A list of recommended and tested disks can be found on our website
www.megasat.tv.
HDD
HDD
ENGLISH
Plastic holder
Plastic holder
25