Megasat HD 935 Twin V2 Bedienungsanleitung Seite 52

4. Main Menu
DiSEqC 1.0 / DiSEqC 1.1
If you connect antenna to DiSEqC Switch, you need to specify the DiSEqC input to which
your selected satellite have been configured.
Motor
Use the t u buttons to select the control of your motor. If you enable this option and
then press OK, you can make further adjustments to the position of the mirror adjust:
Move Auto [W/E]
Press RIGHT/LEFT button, the dish will be motorized to East/West continuously, it will
stop until it find the best signal.
Move Continue
Press RIGHT/LEFT button, the dish will be motorized to East/West continuously until you
press LEFT/RIGHT again.
Move Step
Press RIGHT/LEFT button, the dish will be motorized to East/West by step.
Store Position
Save the current position you searched for the selected satellite.
Go to Position
Press OK button to move the dish to the stored position.
Go to Reference
Press OK button to move the dish to 0 position.
Set West Limit
Enable West limit.
Set East Limit
Enable East limit.
Disable Limit
Disable West limit and East limit.
Channel search
In this menu item you can select different search options:
• All programs
• Free programs
• HD programs
• SD programs
• TV programs
• Radio programs
• FTA TV programs
• FTA Radio Programs
12
ENGLISH