Sirona SIROEndo Gebrauchsanweisung Seite 54

4 Installation
4
1
4
1
D
12
3. Insert the connecting cable of the support arm (4) through the mounting
bearing on the adapter (11 or 12).
4. Insert the support arm (4) into the adapter.
4
11/12
5. Remove the cover (B) and unscrew the screw (C) fully (4 mm Allen key).
Plug together the two connectors of SIROEndo (1) and of the support
arm (4).
i
NOTE
Make sure that both connectors are properly positioned! The connectors are
coded so that they can be plugged together only in the correct orientation.
C
B
6. Open the cover cap (D) on the bottom of the support arm (4).
7. Insert the shaft of the SIROEndo (1) in the articulated arch of the support
arm and pull the cable taut if necessary.
Operating Instructions SIROEndo
60 78 104 D 3488
D 3488.201.01.07.02 11.2009