Yamaha YZ250F Fahrer- Und Wartungshandbuch Seite 406

KICK SHAFT AND SHIFT SHAFT
NOTE:
Slide the spring guide into the kick shaft, make
sure the groove a in the spring guide fits on
the stopper of the torsion spring.
NOTE:
G
G
G
NOTE:
Turn the torsion spring clockwise and hook
into the proper hole a in the crankcase.
Kick idle gear
NOTE:
G
G
4 - 77
3. Install:
Spring guide 1
G
4. Install:
Kick shaft assembly 1
G
Washer 2
G
Apply the molybdenum disulfide grease on
the contacting surfaces of the kick shaft stop-
per a and stopper plate 3.
Apply the engine oil on the kick shaft.
Slide the kick shaft assembly into the crank-
case and make sure the kick shaft stopper a
fits into the stopper plate.
5. Hook:
Torsion spring 1
G
1. Install:
Kick idle gear 1
G
Washer 2
G
Circlip 3
G
Apply the engine oil on the kick idle gear
inner circumference.
Install the kick idle gear with its depressed
side a toward you.
ENG