Cancelling The Brewing Cycle - Gastroback 42711 Bedienungsanleitung

IMPORTANT - After activating the timer, the brewing cycle is going to be started
automatically at the programmed starting time. You do not have to do anything
else (see: 'Using the Timer'). With the timer activated, nevertheless you can start
the brewing cycle at once or de-activate the timer (see: 'De-Activating the Timer'
and 'Starting the Brewing Cycle Immediately').
NOTE
To pour a cup of coffee, you may take out the glass carafe for a short time even
during operation. The drip-stop valve closes the filter basket to avoid dripping of cof-
fee, while the glass carafe is not in place. At the maximum after 15 seconds place
the glass carafe back onto the heating plate to avoid overflow of the filter basket.
CAUTION – The drip stop valve could get blocked by coffee powder. Thus,
when taking out the glass carafe, while the brewing head is still dripping, ensure that
the drip stop valve closes the outlet of the filter basket completely. Place the glass cara-
fe back onto the heating plate after max. 15 seconds. Otherwise, overflow could
occur and hot coffee could run onto the heating plate and under the appliance.
1. Prepare the appliance for operation as described above: assemble the filter sys-
tem (filter holder, filter basket, filter, and splash shield), fill the bean hopper or
filter, push the filter holder under the brewing head, fill the water tank, place the
empty glass carafe onto the heating plate, enter the desired settings (see: 'Using
Whole Coffee Beans' and 'Preparing the Appliance for Operation').
2. When timer operation is desired, ensure that the internal clock is set correctly
and adjust the starting time, before activating the timer (see: 'Using the Timer').
Alternatively, touch the on/off button to start the brewing cycle immediately. The on/
off button illuminates red during operation.

CANCELLING THE BREWING CYCLE

You can cancel any running function (brewing cycle, keep warm, or timer operation)
any time you like. For this, simply touch the red on/off button. The on/off button is
illuminated white again and the current operation stops immediately.
IMPORTANT - Please keep in mind that the brewing cycle cannot be continued
after cancelling the brewing cycle. However, you can start a new brewing cycle
immediately. With water still in the water tank, you can de-activate the grinder
via the grinder button, and thereafter start a new brewing cycle. The appliance
re-assumes operation using the remaining water.
82