Setting The Starting Time; Activating The Timer - Gastroback 42711 Bedienungsanleitung

Setting the Starting Time

13. Hold the timer button touched, until the starting time flashes on the display area.
The default starting time after any interruption of the power supply is "0:00".
14. Within 2 seconds after switching to the starting time, touch the hours button or
minutes button to set the starting time to the desired value. Each touch of a time
setting button (hour or minute) increments the assigned value by 1.
IMPORTANT - The starting time flashes for approx. 2 seconds on the display.
During this time period, you can adjust the starting time via the hour button and
minute button. When no button is touched within 2 seconds after the last entry,
the appliance toggles back to the internal clock, and the hour button and minute
button affect the setting of the internal clock only.

Activating the Timer

WARNING
prepared for operation correctly and completely (see: 'Preparing the Appliance for
Operation'). Otherwise, safe operation is not guaranteed.
IMPORTANT - For activating the timer, you need to adjust the internal clock and
starting time first (see: 'Setting the Internal Clock' and 'Setting the Starting Time').
The timer will be de-activated automatically, when the programmed brewing cycle
is started. If you wish to start the appliance 24 hours later via the timer, you need
to activate the timer again. Ensure that the desired starting time is still stored in the
memory of the appliance.
NOTE
After any type of interruption of the power supply, the starting time will be set to
the default factory setting ("0:00"). Adjust the starting time, before activating the
timer (see: 'Setting the Starting Time').
15. For checking the starting time of the timer, hold the timer button touched until the
starting time flashes on the display area. As long as the starting time flashes, you
can make corrections via the hour button and the minute button (see: 'Setting the
Starting Time').
16. When the starting time is set correctly, activate the timer via touching the timer
button shortly. The timer button illuminates red and the timer icon is shown on the
display area. The appliance will start operation automatically at the program-
med starting time with no further entry by the user.
80
– Before activating the timer, always ensure that the appliance is