Assembly And Usage Of The City Carrycot - Emmaljunga Classic Sport Bedienungsanleitung

Assembly and usage of the
City Carrycot
1
2
1
2
4
3
4
5
5
7
8
104
(Accessory to Classic Sport stroller)
Assembly of pram body
• Remove plastic covers from mattress, fabrics and discard. Slide the
two metal support brackets (1) into the grooves on the base of the
pram body.
• The base is made of wood.
WARNING
1
• Risk of suffocation. Do not let your children play with the plastic
packaging.
• Make sure that the metal support bars are attached so that the
pram stability and safety will not be jeopardised.
• Insert the mattress (4).
3 • The exclusive mattress consists of a combination of fibre filling
and polyeter filling. Make sure that you place the mattress with the
firmer polyeter filling facing downwards in the carrycot.
WARNING
• The depth from the top of the mattress together with other bed
accessories to the carrycot upper part (3) must be at least 150mm.
• Do not add a mattress thicker than 45 mm.
• Attach the hood to the pram body by pushing the plastic legs of the
hood into the plastic receivers on the pram body. Make sure they
click into place.
• Attach the poppers on the hood fabric onto the plastic receivers (5),
on each side. Press the velcro (6) onto the pram body.
6
• Attach the poppers on the apron onto the hood (7) and onto the
plastic receivers (8) on each side.
7
IMPORTANT
8
• The hood cannot be pushed back when the apron is attached to the
hood without first releasing the poppers (8)
Manual Classic Sport v 1.0