Hirschmann HiOS-3S RSP Referenzhandbuch Seite 2301

EtherNet/IP
Service Identity
code Object
Mac Fil- -
ter(0x36)
Vendor Spe-
cific
Verify Fault
Location
(0x4B)
Clear Rapid
Faults
(0x4C)
Restart Sign
On (0x4D)
Clear Gate-
way Partial
Fault
(0x04E)
I/O Data
Device Status
Link Status
Output Links Admin State
applied
Utilization Alarm
Access Violation Alarm
Multicast Connections
TCP/IP Connections
48
TCP/IP Ethernet
Interface Link Object
Object
- -
Value (data types and sizes
to be defined)
Bitmask (see Switch Agent
Attribute 1)
Bitmask, 1 Bit per port
0 = No link
1 = Link up
Bitmask (1 Bit per port) to ack-
nowledge output.
Link state change can be
denied, e.g. for controller
access port.
0 = Port enabled
1 = Port disabled
Bitmask, 1 Bit per port
0 = No alarm
1 = Alarm on port
Bitmask, 1 Bit per port
0 = No alarm
1 = Alarm on port
Integer, number of connections Input (1 DINT 32 Bit)
Integer, number of connections Input (1 DINT 32 Bit)
4.2 EtherNet/IP-Entity-Parameter
Switch Base
Agent Switch
Object Object
Add mac-fil- -
terSTRUCT
of:{ USINT
VLAN-
IDARRAY of
6 USINT
MAC
DWORD
Port Mask}
Direction
Input, DWORD 32 Bit
Input (DWORD 32 Bit *)
Input (DWORD 32 Bit *)
Input (DWORD 32 Bit *)
Input (DWORD 32 Bit *)
UM IndustProtocol HiOS-3S RSP
DLR
-
Verify Fault
Location
Clear Rapid
Faults
Restart Sign
On
Clear Gate-
way Partial
Fault
Release 6.1 09/2016