Hirschmann HiOS-3S RSP Referenzhandbuch Seite 2292

EtherNet/IP
Id Attribute
3 Interface
state
9 Admin State
10 Interface label Get
Die folgende Tabelle listet die Hirschmann-Erweiterungen zum Ethernet Link
Object auf:
Id Attribute
100=0x64 Ethernet
Interface
Index
101=0x65 Port Control
102=0x66 Interface Utili-
zation
103=0x67 Interface Utili-
zation Alarm
Upper
Threshold
104=0x68 Interface Utili-
zation Alarm
Lower
Threshold
105=0x69 Broadcast
limit
UM IndustProtocol HiOS-3S RSP
Release 6.1 09/2016
Access Data type
Rule
Get USINT
Set/Get USINT
SHORT-STRING
Access Data type
Rule
Get USINT
Get/Set DWORD
Get USINT
Get/Set USINT
Get/Set USINT
Get/Set USINT
4.2 EtherNet/IP-Entity-Parameter
Description
Current state of the interface:
Value 0: Unknown interface
state,Value 1: The interface is enab-
led,Value 2: The interface is disab-
led,Value 3: The interface is testing
Administrative state:
Value 1: Enable the interface,Value 2:
Disable the interface.
Human readable ID
Description
Interface/Port Index (ifIndex out of
MIBII)
Bit 0 (RO): Link state
0 link down,
1 link up
Bit 1 (R/W): Link admin state
0 disabled,
1 enabled
Bit 8 (RO): Access violation alarm
Bit 9 (RO): Utilization alarm
The existing Counter out of the pri-
vate MIB hm2IDiagfaceUtilization is
used. Utilization in percentage (Unit
1% = 100, %/100). RX Interface Utili-
zation.
Within this parameter the variable
hm2DiagIfaceUtilizationAlarmUp-
perThreshold can be accessed. Utili-
zation in percentage (Unit 1% = 100).
RX Interface Utilization Upper Limit.
Within this parameter the variable
hm2DiagIfaceUtilizationAlarmLo-
werThreshold can be accessed. Uti-
lization in percentage (Unit 1% =
100). RX Interface Utilization Lower
Limit.
Broadcast limiter Service (Egress
BC-Frames limitation, 0 = disabled),
Frames/second
39