Permanent Settings In Programming Mode - Jura 657 Original Bedienungsanleitung

5 Permanent settings in programming mode

Product settings
Product
1 espresso,
1 coffee,
2 coffees
Cappuccino, milky
coffee, latte macchi-
ato
Hot milk
Hot water (portion)
Steam (permanent)
With the PRODUCT SETTINGS programme item you can select indi-
vidual settings for all coffee and milk specialities as well as hot
water.
The following permanent settings can be made:
Amount
WATER AMOUNT: 25 ML – 300 ML
(with 2 coffees: amount per cup)
POWDER AMOUNT
WATER AMOUNT: 25 ML – 300 ML
POWDER AMOUNT
MILK AMOUNT: 0 / 3 SEC – 120 SEC
MILK FOAM: 0 / 3 SEC – 120 SEC
MILK AMOUNT: 0 / 3 SEC – 120 SEC
WATER AMOUNT: 25 ML – 500 ML
–
Settings in programming mode always follow the same model.
Example: Proceed as follows to change the powder amount for
1 espresso.
Precondition: Your IMPRESSA is ready for operation.
T Open the cover of the programming buttons.
O T Press the P button until WATER HARDNESS appears.
T Press the + or - button several times until PRODUCT
SETTINGS is shown.
O T Press the P button to enter the programme item.
SELECT PRODUCT
T Press the 1 espresso button.
1 ESPRESSO / WATER AMOUNT
T Press the + button several times until 1 ESPRESSO / POWDER
AMOUNT is shown.
O T Press the P button to enter the programme item.
POWDER AMOUNT
5 Permanent settings in programming mode
Additional setting options
GRINDER (left and right grinder
in percent)
TEMPERATURE: LOW, NORMAL,
HIGH
GRINDER (left and right grinder
in percent)
TEMPERATURE: LOW, NORMAL,
HIGH
–
–
–
25