Preparing And Using For The First Time; Standard Products; Setting Up - Jura 657 Original Bedienungsanleitung

2 Preparing and using for the first time

Standard products

Settings by the JURA service
technician

Setting up

This chapter provides you with the information you need to use your
IMPRESSA without any problems. You will prepare your IMPRESSA
step-by-step for your first coffee experience.
Your IMPRESSA is supplied with the following products as stand-
ard:
1 espresso
Z
1 coffee
Z
2 coffees
Z
Milk foam
Z
Cappuccino
Z
Latte macchiato
Z
Milky coffee
Z
Milk
Z
The following settings can only be made by the JURA service techni-
cian:
Customised product programming. The standard products
Z
can be replaced by:
2 espressi, 1 ristretto, 2 ristretti, small pot, macchiato, milky
U
coffee, hot water, steam, 2x
Grinder selection or rinse button (all buttons can be
U
arranged to preference)
Blocking products
Z
Setting the filter capacity
Z
Assigning code groups: Three code groups can be assigned.
Z
The respective code groups correspond to different authorisa-
tions. It can be defined, for example, that the programming
mode of the maintenance programmes is blocked by a code.
When setting up your IMPRESSA, please note the following:
Place the IMPRESSA on a horizontal surface that is not sensi-
Z
tive to water.
Choose a spot for your IMPRESSA which is protected against
Z
overheating. Ensure that the ventilation slots are not cov-
ered.
2 Preparing and using for the first time
11