3.5
Adjusting the steering column
– Release steering column lock (4) and
push steering column forward or
backward to desired position.
– Retighten steering column.
3.6
Providing operational readiness
– Unlatch master switch (10).
To do so:
Push in rocker switch (s) and pull
upwards (r) until the master switch
noticeably latches.
– Insert the key in key switch (5) and
turn the key clockwise towards the "I"
position until reaching the stop.
– Check function of horn pushbutton
(43).
f
Check function of electric and hydraulic
brake as well as parking brake.
The truck is now ready for operation.
The multifunction display (2) indicates
the remaining battery capacity.
A
After pulling the EMERGENCY OFF and turning the key switch clockwise the truck
executes a selftest for approximately 3 to 4 seconds (controls and motors are
checked). During this period travelling movements are not possible. If the accelerator
pedal is actuated within this period the display will indicate "Travel home position".
E 14
2
4
5
10
43