Safety Restraint Belt - Jungheinrich EFG-Vac 25 Betriebsanleitung

3.3

Safety restraint belt

f
Put on the safety restraint belt every time before moving the industrial truck.
The belt protects you from serious injuries.
Protect the restraint belt from dirt (e. g. cover up at standstill) and clean regularly. If
the belt catch or retractor is frozen, let it thaw and allow to dry to avoid freezing again.
A
The drying temperature of the warm air must not exceed +60°!
f
Modifications to the restraint belt are not permitted!
Increased risk through malfunctions.
–– Replace restraint belts after an accident.
–– Use only original spare parts for retrofits and repairs.
f
Damaged or non-functioning restraint belts must be exchanged by authorised dealers
or in the subsidiary.
Managing extraordinary situations
f
If the industrial trucks is about to turn
over, do not unfasten the belt and do not
try to jump off the truck under no
circumstances.
Jumping off increases the risk of
suffering injuries!
Correct behaviour:
–– Lean the upper body over the steering
wheel.
–– Grip the steering wheel with both
hands and support yourself with the
feet.
–– Tilt body against turning direction.
E 10