Picking Up, Transporting, And Putting Down Load Units - Jungheinrich EFG-Vac 25 Betriebsanleitung

4.7

Picking up, transporting, and putting down load units

m
Before picking up a load unit the driver must make sure that it has been correctly
palletised and does not exceed the permissible capacity of the truck.
Observe load diagram!
Adjusting the fork arms
f
The fork arms must be adjusted in such
a way that both have the same distance
to the outside edges of the fork arm
carriage and the load centre is centred
between the fork arms.
–– Swivel locking lever (49) upward.
–– Push the fork arms (48) on the fork
arm carriage (50) into the correct
position.
–– Swivel locking lever downward and
shift the fork arm until it latches in a
notch.
Picking up a load
–– Carefully approach the load to be
picked up.
–– Engage the parking brake (3).
–– Set the mast to vertical position.
–– Lift the fork arms to the appropriate
height relative to the load.
E 24
3