Jungheinrich EFG-Vac 25 Betriebsanleitung Seite 57

Auxiliary control I
(Integrated side-shift)
–– To shift fork arm carriage to the left,
push key (45) at the MULTIPILOT.
–– To shift fork arm carriage to the right,
push key (46) at the MULTIPILOT.
Auxiliary control II
A
To operate a hydraulic attachment the
MULTIPILOT can be rotated. When
operating attachment the operating
instruction of the manufacturer must be
observed.
f
Observe the carrying capacity of the
attachment.
Auxiliary control III
Push key (47) at the MULTIPILOT for
auxiliary control III (e. g. locking).
Controlling the speed of the working equipment
The excursion of the MULTIPILOT movements control the speed of the hydraulic
cylinders.
After releasing the MULTIPILOT it travels automatically back to its home position and
the working equipment remains in the position reached.
m
Always operate the MULTIPILOT sensitively and not erratically. Immediately release
the MULTIPILOT when the working equipment reaches the limit stop.
f
Lifting of persons using the lifting device
is prohibited.
E 22
45
47
46