4.3
Pushing/Pulling, Steering, Braking
4.4
Pushing/Pulling
Z
To avoid abrasion and wear, travelling without load should be
with the load handler raised.
Requirements
– Start up the truck, see page 21.
Procedure
• Push or pull the truck in the required direction using the
handle (1) on the tiller (4).
4.5
Steering
Procedure
• Swing the tiller (4) to the left or right.
Z
In tight bends the tiller extends beyond the truck geometry.
4.6
Brakes
The truck's braking characteristics depend largely on the
surface condition of the lanes. The operator must take this into
account when travelling.
Manual braking
Procedure
• Pull or push against the direction of movement.
The truck brakes.
Braking in an emergency
Procedure
• Press the handle (2) in direction S (lowering).
The load is lowered and the truck brakes.
1
4
2
23