Operator Position Extension; Adjusting The Driver's Seat - Jungheinrich EFG 535 Betriebsanleitung

6.8

Operator position extension

DANGER!
Altering the tilt resistance can be dangerous
The lateral tilt resistance reduces with a higher truck centre of gravity.
The height above the overhead guardincreases by 300 mm.
Adapt the travel speed, in particular when cornering.
Z
For entry and exit (see "Entry and exit" on page 63).
6.9

Adjusting the driver's seat

Adjusting the backrest extension
CAUTION!
Accident risk when adjusting the backrest during travel
Do not adjust the backrest extension while travelling.
Procedure
• The backrest extension height can be adjusted by changing the detent.
• Pull the backrest up and lock it in place to extend the backrest.
• Push the backrest down and lock it in place to shorten the backrest.
Adjusting the swivel seat
Procedure
• Pull the locking lever (128) back while
simultaneously turning the seat to the required
position.
• Engage the lock.
The swivel seat is not adjusted and locked in
position.
Z
Only operate the truck when the swivel seat is
locked in position.
128
111