Optional Equipment; Cancode Keypad - Jungheinrich EFG 535 Betriebsanleitung

6

Optional equipment

6.1

CanCode keypad

CanCode keypad
The keypad consists of 10 digit keys, a Set key and a o
key.
The O key indicates the follow operating statuses via a
red / green LED:
– Code lock function (starting up the truck).
– Setting and changing parameters.
6.1.1 Code lock
When the correct code is entered, the truck is ready for
use. You can allocate an individual code to each truck, operator or group of operators.
When originally supplied from the factory, the code is indicated on a sticker. Change
the master and operator codes when using the truck for the first time.
Z
When the truck is originally supplied, the operator code for the driver's display and
CANCODE (o) is 2-5-8-0.
Commissioning
Procedure
• Switch on the Emergency Disconnect.
The LED (122) lights up red.
• Enter the code.
When you enter the correct operator
code the LED (122) turns green. If the
LED (122) flashes red this means the
wrong code has been entered. Try
again.
The truck is switched on
Z
The Set key (88) has no function in operating mode.
102
118 119 120
1
4
7
Set
88
122
1 2 3
4 5 6
7 8 9
0
Set
2 3
5 6
8 9
121
0