Fitting Of The Spark Plug - Rotax 125 MAX evo Einbauanleitung Und Betriebsanleitung

ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
2.1.2.

Fitting of the spark plug

See Fig. 3.
The engine will be supplied with a spark plug of the type DENSO IW 27.
 Note:
If the ambient air temperature is below 10°C / 50°F the use of a spark plug with a
higher heat range is recommended (DENSO IW 29 or 31)
 Remove the transport plug from the spark plug tapping.

Verify electrode gap of spark plug. Adjust as required.
 Note: The electrode gap of the spark plug should be 0.4 mm (0.016 in) to 0.6 mm (0.024
in) (for DENSO spark plugs) Only slight bending of the ground electrode is
permitted.
 Fit supplied spark plug (pos. 9) and tighten to 27 Nm (239 lbf in)
 Install the spark plug connector (pos. 10), ensure correct engagement.
Seite/page 52/98
Fig. 2
Fig. 3
Ausgabe/Edition 11/2014