TOHATSU MFS 9.9E Benutzerhandbuch Seite 48

46
ENGINE OPERATION
3
1. Reverse lock lever
2. Tilt down position
3. Tilt up position
7
ENOM00063-1
Tilt down
Pull the reverse lock lever upward until it
stops. (This is the tilt down position.) Llift
up the outboard motor slightly, and then
lower it.
3
1. Reverse lock lever
2. Tilt down position
3. Tilt up position
1
2
ENOF00059-0
ENOF01216-1
1
2
ENOF00059-0
ENOM00069-A
Power Tilt type
Tilt up
1. Operate the Power Tilt switch and tilt
the outboard motor up.
2. Lock the tilt with the Tilt stopper after
the outboard motor has been tilted up
Tilt down
1. Release the tilt stopper from the set-up
position while slightly tilting up out-
board motor.
2. Operate the Power Tilt switch and tilt
the outboard motor down until the
motor touches to the thrust rod.
UP
DN
DN
1
1. Tilt stopper
UP
ENOF00067-B
ENOF00069-A