Duty Of Inspection - probst POWER PLAN PP Bedienungsanleitung

Operating instructions
PP
6.8

Duty of inspection

 Under BGR 500, the machine owner has a duty to ensure that the machine is inspected by a
qualified expert at intervals of at least once a year and that any faults found are repaired
immediately.
 The corresponding legal regulations and the declaration of conformity must be observed.
 This inspection must be documented in writing.
 Probst recommends attaching the specialist testing inspection plate in a clearly visible place on the
machine once the inspection has been completed and any faults repaired. See "Overview of safety
symbols and information signs". Label 1.
Device Year
69 / 70
Maintenance and care
Date Expert
V1
Company
EN