Connecting Air Conditioning Unit Fj1100, Fj1700, Fj2200, Fj2700; Fj3200 - Dometic DC-Kit PP12 Montage- Und Bedienungsanleitung

Installing and connecting the DC kit
➤ Install the remote control.
D
DANGER! Electric shock!
Only connect the battery once you have the completed all the installa-
tion work and you are certain it has been done properly.
7.3 Connecting air conditioning unit FJ1100, FJ1700,
FJ2200, FJ2700, FJ3200
➤ Remove the air outlet unit of the air conditioner; if necessary remove the top
cover ( FreshJet) (fig. 5, page 6).
➤ Connect the on/off cable for the FreshJet to the connection socket on the circuit
board (fig. 6, page 7).
I
NOTE
Guide the on/off cable carefully past the fan.
PP12
Circuit diagram: fig. 1, page 3
➤ Route the on/off cable from the air conditioning unit to the charging current
distributor.
➤ Connect the on/off cable to connections I4 and I2 on the charging current
distributor (fig. 4, page 6).
➤ Connect the inverter adapter ( Inverter Adapter).
➤ Attach the air outlet unit of the air conditioner ( FreshJet) (fig. 5, page 6).
➤ Route the connecting cable for remote control MCR9 to the inverter and connect
it ( inverter).
DSP-T12/24
Circuit diagram:
• DC-Kit DSP-T12: fig. 2, page 4
• DC-Kit DSP-T24: fig. 3, page 5
➤ Connect the adapter cable to the on/off cable.
➤ Connect the extension cable to the adapter cable.
➤ Connect the extension cable to connections I2 and I5 on the charging current
distributor (fig. 4, page 6).
20
DC-Kit PP12, DSP-T12/24
EN