31 5.1.2 Measurement Boards; 31 5.2 Replacement And Wearing Parts; 31 5.3 Disposal And Scrapping - Bosch FWA 46xx + Originalbetriebsanleitung

5. Maintenance
5.1 Cleaning
5.1.1 Trolley
¶
The trolley housing and the monitor are only to
be cleaned using a soft cloth and neutral cleaning
agents.
¶
Do not use abrasive cleaning agents and coarse
workshop cloths.
¶
Use a special fiber cloth to clean the monitor.
5.1.2 Measurement boards
¶
If dirty, clean the boards with warm water contai-
ning a small quantity of detergent (dab only, do not
rub or scour).
¶
Take care when storing the boards and protect
against dust.
5.1.3 Sensors
¶
The measuring devices must not be allowed to come
into contact with splashwater.
¶
Provide the measuring device with a water-proof
cover when cleaning.
¶
Clean the glass filters of the cameras at regular in-
tervals with a clean, soft cloth (e.g. if contaminated
or moist).
5.2 Replacement and wearing parts
Designation
Turntable
PC unit
1)
Brake clamp
Steering wheel clamp
Sensor
Measurement box
1)
PoE Switch
1)
Cable set
Depending on version
1)
Tab. 2: Replacement and wearing parts
Robert Bosch GmbH
5.3
1. Disconnect the FWA 46xx + from the mains and
detach the power cord.
2. Dismantle the FWA 46xx + and sort out and dispose
of the different materials in accordance with the
applicable regulations.
Only for EC countries:
Order number
1 690 501 001
–
1 690 401 006
1 690 401 007
–
–
–
–
Maintenance | FWA 46xx + | 43 | en
Disposal and scrapping
FWA 46xx +, accessories and packaging
should be sorted for environmental-friendly
recycling.
¶
Do not dispose FWA 46xx + into household
waste.
The FWA 46xx + is subject to the European
directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic de-
vices, including cables, accessories and batte-
ries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of FWA 46xx + prevents
environmental pollution and possible health
hazards.
1 690 706 098
|
2017-11-27