Product Description; Intended Use; Description Of Fwa 46Xx - Bosch FWA 46xx + Originalbetriebsanleitung

en | 30 | FWA 46xx + | Product description
3.

Product description

3.1

Intended use

The FWA 46xx + is only to be used for wheel alignment
on passenger vehicles and light commercial vehicles.
Any other or additional application does not constitute
the intended use.
3.2

Description of FWA 46xx +

Together with the trolley, the FWA 46xx + is suitable for
mobile applications at various measurement bays.
The basic version consists of a trolley with monitor,mouse,
mouse pad, PC, printer and the sensors. Mounts for sto-
rage of the sensors are integrated into the side panels
of the trolley.
!
Always detach the sensors when transporting the
trolley as otherwise the sensors could be damaged
or the settings altered.
Abb. 1: Front view of FWA 46xx + with accessories
1 Monitor
2 Keypad
3 Mouse
4 Printer
5 Sensor
6 PC unit
7 Turn table
1)
8 Filler
9 Sensor cable set
1)
Depending on version
1)
|
1 690 706 098 2017-11-27
Abb. 2: Rear view of FWA 46xx +
1 Multiple socket outlet
2 Brake clamp
3 Steering wheel arrester
4 PoE-switch
sensor hub
5 Measurement box
i
The connectors of the sensors can be inserted in any
order in the hub (PoE-Switch).
i
The two measurement box connectors can be
plugged into the measurement box in any order.
i
If use is being made of an existing PC, check whe-
ther this PC complies with the necessary specifica-
tions. Information can be obtained from your Bosch
franchized dealer.
!
No other Ethernet users are to be connected to the
vacant PoE-Switch slots. Only use the LAN connec-
ting cables included in the scope of delivery.
i
When not in use, switch off the unit by way of the
master switch.
i
The PC must be re-started in the event of changes to
the Easy 3D server.
Abb. 3: Easy 3D-Server
Robert Bosch GmbH