Starting The Baking Program - Gastroback Design Brotbackautomat Plus Bedienungsanleitung

7. Close the lid. The appliance is now prepared for starting a program.

startInG the BaKInG ProGram

Leave the appliance cool down, before starting a new baking pro-
ImPortant:
cess. With the display showing H:HH after starting a new program, the temperature
in the heating compartment has been too high. In this case, immediately unplug the
appliance and open the lid until the appliance has reached ambient temperature.
1. Before selecting the baking program, ensure that the heating compartment has
cooled down. Take out the bread pan, fill in the ingredients, and place the
bread pan back in the heating compartment. Then close the lid.
WarnInG – Risk of Fire and Electric Shock!
Before each use, always ensure that the heating compartment is clean and free from
foreign objects (e.g. fluffs, baked-on food). DO NOT fill more than the maximum total
amount of 750 g into the bread pan! Check your recipe accordingly. Otherwise, the
bread pan could overflow, with food running out onto the heating elements. Food
and foreign objects on the heating elements will be burnt to charcoal during the bak-
ing process, thus causing risk of fire and electric shock via short-circuit.
2. Insert the power plug into the wall power outlet. (See: ›Important Safeguards for
Electrical Appliances‹) An acoustic signal sounds and the LCD screen shows the
program number 1 and the duration of this baking program.
3. Select your desired program by pressing the MENU button. (See: ›Programs of
the Bread Maker‹) Each input is confirmed by an acoustic signal.
4. Use the COLOR button to select the desired colour of your bread. The arrow on
the left side of the LCD screen shows whether you have chosen Light, Medium,
or Dark.
tip:
The buttons COLOR, LOAF, TIME+, and TIME– respond even to light touches.
Slightly tip on the buttons with your finger. A beep sounds with each entry.
The buttons of the appliance are inactive, whenever the respective function is not
available with the currently selected program, or while a program is running. Run-
ning programs must be terminated first using the START/STOP button, when you
wish to make new entries.
5. Use the LOAF button to select the used amount:
Place the arrow on the right side of the LCD screen beneath the denotation
Small, if the total amount of all ingredients is below 500 g.
Select Large, if the total amount of all ingredients is between 500 g and 750 g.
61