Cleaning; Troubleshooting; Safety Instructions - Heiniger Xplorer Originalbetriebsanleitung

Only use the special oil supplied or a paraffin oil conforming to
X X
the ISO VG 15 specification.
NOTE!
The provided oil is non-toxic and produces no irritation on con-
X X
tact with the skin or the mucous membranes. This paraffin oil
degrades to some 20 % after 21 days (CEL-L-33-T-82).
Oil the blades prior to, during and after every use.
X X
Oil the blades no later than when the blades leave streaks or slow down.
X X
Apply several drops of oil on the front and on the sides of the clipping
X X
blades (see Fig. 15)
Immediately replace damaged or notched blades in order to avoid
X X
injuries.
6.10

Cleaning

CAUTION!
IMPROPER CLEANING.
RISK OF DAMAGING THE CLIPPER!
Use only a dry cloth and the brush provided to clean the clipper.
X X
Never use compressed air for cleaning the clipper.
X X
Housing of the clipper
Clean the housing of the clipper with a dry cloth.
X X
Clipping blades, clipping head and charger
Disconnect the charger from the power supply.
X X
Use the brush supplied to clean the clipping blades, clipping head and
X X
charger.
Lubricate the clipping blades as described in chapter 6.9.
X X
Remove any hair from the charging bay.
X X
Clean the terminals with a dry cloth if necessary.
X X
7

Troubleshooting

7.1

Safety instructions

DANGER!
DANGER OF FATAL ELECTRIC SHOCK!
Fatal electric shocks can result from contact with electrically live
conductors or components!
Switch the equipment off before troubleshooting the problem.
X X
Repairs to electrical devices must only be carried out by the
X X
factory service department or specialists who have been
trained by the manufacturer.
During the warranty period the device must be opened only by personnel
authorised by the manufacturer, otherwise the warranty will be void.
Instruction Manual / Cattle and Horse Clipper
17