Reely SKY 22 93 80 Bedienungsanleitung Seite 53

B Tail Function
As the helicopter is equipped with two counter-rotating rotors, there is no torque around the yaw
axis (rotor shaft). The helicopter does not need a tail rotor for stabilization.
To allow the model to turn around the yaw axis (rotor shaft), the rotors run with slightly different
speeds and the model begins to turn.
The control of the tail function is effected with the left control stick also (see figure 1, pos. 10). If the
stick is steered slightly towards the left, the tip of the fuselage turns towards the left.
If you steer towards the right, the tip of the fuselage turns likewise towards the right.
C Roll Function
The roll function allows you to move your model helicopter sideways to the right and to the left.
The control is effected with the right control stick (see figure 1, pos. 4).
If the stick is steered slightly towards the left, the model drifts sideways to the left.
If you steer to the right, the model drifts sideways to the right.
D Nick Function
With the help of the nick function you can move the model helicopter forward and backward. The
control is effected likewise with the right control stick (see figure 1, pos. 4).
If you press the stick slightly forward, the model flies forward.
If you pull the stick towards the back, the model flies backwards.
An overview of the steering functions with the corresponding reactions of the model heli-
copter is on the following page.
53