Transport Latches; Parking Brake; Diff Lock Control - Ransomes HR6010 Handbuch

6 CONTROLS
6.6

TRANSPORT LATCHES

When transporting the machine ensure the cutting
decks are raised and the transport latches (A) are
engaged.
6.7

PARKING BRAKE

The parking brake (B) is engaged when the lever is
moved toward the operator. The brake is fitted with
a micro switch that senses brake position. The brake
must be applied to start the machine, and when
stopping and leaving the seat.
CAUTION:- The parking brake must not be
applied whilst the vehicle is moving
6.8

DIFF LOCK CONTROL

The Diff lock (A) is operated by depressing the foot
switch. When the foot switch is released the Diff Lock
ceases to operate. The Diff Lock should only be used
in severe situations, and should never be used on
Tarmac or whilst steering
en-16
SAFETY, OPERATORS & MAINTENANCE MANUAL
A A
B